3-26
Installing the Software
R4C0910
Rev. C
A5 size INSTALL.FM
1/12/00 Pass 3
L
Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
2. In the following or similar dialog box, move the slider to the
right or left until the two shades of the gray horizontal stripes
match.
Note:
View the screen from a distance. The gray stripes will not perfectly
blend together; however, try to make the two tones match as closely
as possible.
3. Click
OK
to register the calibration setting.
4. The message
Setup is complete
appears. Click
OK
.
You will not need to change the screen calibration again so long
as you continue to use the same display.
r
To Next Page
Loading...
