Chapter 1 Product Description
Rev. A
1-
Paper Feeding Method
Friction feed with built in ASF (Auto Sheet Feeder)
Line Spacing
1/6 inch or programmable at 1/360 inch
Paper Path
Top entry (from ASF) only
Feeding Speed
66.6 ms (at 1/6 inch line-feed)
3.0 inch/sec (76.2 mm/sec / at continuous-feed)
ASF Capacity
Size :Index card to Legal
Thickness *1 :Less than 8mm
Paper capacity *2 :Normal cut sheets =100 sheets (64g/m
2
)
:Envelops =10
:Coated papers (360dpi) =65
:Coated papers (720dpi) =65
:Glossy papers *3 *4 =30
:Transparency films *4 =30
:Index cards *4 =30
Notes) *1: Total thickness of paper stack on the ASF.
*2: Those numbers above should be considered as reference. The actual paper accumulation
should be considered first.
*3: Only when the top margin is set for 30mm with A4/Letter size paper, otherwise only one sheet
can be set at a time.
*4: Specified paper must be set at the bottom of stack to ensure proper feeding operation:
Normal paper =Glossy paper, Transparency film
Card Board =Index card
(The one packed with the index card package)
To Next Page
Loading...
