Chapter 4 Adjustment
Rev. A
4-
Left
"PAPER GUIDE, FRONT;B"
Right
(HP side)
Rib: Avoid 2ribs from left
Carriage
Assembly
[Thickness Gauge] Rib: Avoid 1 rib at right end
"ROLLER, ASSEMBLY, PF"
"PAPER GUIDE, FRONT;B"
*Put the gauge on a flat face
*Align the center of gauge and
the ribs
Figure 4-1. Paper Gap Adjustment - Thickness Gauge Setting
Position Mark
Forward
(Gap: Wider)
Backward
(Gap: Narrower)
Side Frame
"BUSH, PARALLEL ADJUST, RIGHT"
"LEVER, PG"
Figure 4-2. Paper Gap Adjustment - Adjustment Procedure
Printhead
(Nose face)
"CLEANER, HEAD"
Overlap = 0.5mm or more
Figure 4-3. “CLEANER, HEAD” Overlap
To Next Page
Loading...
