Epson 60 - Appendix E. List of Features

The following tables show the features available in Level 1 and Level 2 of printer setup
mode (Selectype mode). The possible settings, and the factory settings are also shown.
Level 1
Feature Factory Setting
INPUT
AUTO
AUTO
STD
PAGE SIZE
A4
LT
LT
HLT
COPIES
1 to 999
1 copy
ORIENT
Depends on the emulation mode; see the tables
at the end of the Appendix.
FONT
STATUS SHEET
FONT SAMPLE
SUB CONFIG
Depends on the emulation mode; see the tables
at the end of the Appendix.
SYSTEM CONFIG
FULL PRINT 0 to 62, depending on
the amount of
memory installed
0
T-OFFSET -64 to +63 0
L-OFFSET -64 to +63 0
MEMORY LEFT
LOAD MACRO 0 to 4 0
SAVE MACRO 1 to 4 1
DELETE MACRO 1 to 4 1
POWER ON MACRO 0 to 4 0
APPENDIX E. LIST OF FEATURES
E-1