Epson 890 - Interfaces

Interfaces
External VGA Auto-sensing, 15-pin, D-sub,
female connector for analog
monitor, supports
simultaneous display with
LCD using Fn F10 hot key
sequence or software
command
Parallel Centronics
®
compatible;
25-pin, D-sub, female
connector, bidirectional 8-bit
parallel; autodetects ECP or
EPP devices when connected
and turned on at system
start-up
Serial RS-232C, programmable,
asynchronous, 9-pin, D-sub
male connector
External
keyboard/mouse
Auto-sensing, 6-pin, mini-DIN
connector for a PS/2-type
external keyboard, keypad, or
pointing device
Phone jock
Standard RJ-11 connector with
optional internal send/receive
fax/modem installed
Infrared
Supports optional IrDA-
compliant interface; up to
115.2 kbits/second to a
distance of 3.3 feet (1 meter)
within a 30° viewing ang1e;
can use COM1 (3F8h) or COM2
(2F8h)
Specifications A-3