5. Reattach the back cover as shown below.
6. Fasten the back cover with the two screws.
7. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See “Printing a Configuration
Status Sheet” on page 154.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See
“Making Optional Settings” on page 174.
Removing a CompactFlash memory
w
Warning:
Be careful when working inside the printer as some components are sharp and may cause injury.
Epson AcuLaser C9300 Series User's Guide
Installing Options 131
To Next Page
Loading...
