Setup Menu
Item Settings (default in bold)
Language
English, Français, Deutsch, Italiano, ESPAÑOL, SVENSKA, Dansk, Nederlands, SUOMI,
Português, Norsk,
, , Türkçe, , ,
Time Out
0, 5 to 60 to 300 in increments of 1
MP Mode
Normal, Last
Manual Feed
Off, 1st Page, EachPage
Copies
1 to 999
Duplex
*1
*2
Off, On
Binding
*1
*2
Long Edge, Short Edge
Start Page
*1
*2
Front, Back
Skip Blank Page
*3
Off, On
Auto Eject Page
*4
Off, On
Size Ignore
Off, On
Auto Cont
Off, On
Page Protect
*3
Auto, On
A4/LT Auto Switching
On, Off
Convert to Monochrome
On, Off
LCD Contrast
0 to 7 to 15
RAM Disk
*1
*5
Off, Normal, Maximum
Confirm Media Type
No, Yes
Job Info. Display Pattern 1, Display Pattern 2, Off
*1
Available only when the corresponding option is installed.
*2
Available only when you use A4, A3, A5, B4, B5, LT, LGL, GLG, B, or EXE size paper.
*3
Available only for ESC/Page, ESC/P2, FX, or I239X mode.
*4
Not available in PS3 and PCL.
*5
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again.
Language
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 70
To Next Page
Loading...
