Epson AcuLaser C9300N - Printing Tasks; Monochrome Model Compatibility mode; Adjusting the weight of thin lines

1. Click the Basic Settings tab.
2. Select Advanced, then click More Settings to open the More Settings dialog box.
3. Select the Toner Save check box, then click OK.
Monochrome Model Compatibility mode
When the following occurs while printing in black-and-white, use this function.
❏ The text and lines are too thin.
❏ The print data size is too large.
1. Click the Basic Settings tab.
2. Select Advanced, then click More Settings to open the More Settings dialog box.
3. Select Black as Color, select the Monochrome Model Compatibility check box, and then click
OK.
Note:
When you use this mode, the amount of toner consumption increases.
Adjusting the weight of thin lines
Thin lines can be printed in thicker lines as visible.
1. Click the Basic Settings tab.
2. Select Advanced, then click More Settings to open the More Settings dialog box.
3. Select the Dot Correction check box, then click OK.
The default setting for the Dot Correction is on.
Epson AcuLaser C9300 Series User's Guide
Printing Tasks 45