Epson AcuLaser C9300N - Paper Jam MP a (MP Tray or Cover A)

w
Warning:
❏ Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked
CAUTION, or the surrounding areas. If the printer has been in use, the fuser and the
surrounding areas may be very hot. If you must touch one of these areas, wait 40 minutes to
allow the heat to subside before doing so.
❏ Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
Paper Jam MP A (MP tray or Cover A)
1. Remove the stack of paper.
2. Open cover A using lever A.
Note:
Do not open cover A using button B.
Epson AcuLaser C9300 Series User's Guide
Troubleshooting 148