Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide 9/9/05
Printer Component, Software Item, LCD Display, Printer Button Page 7.
Step 7: Cleaning
The final step in the laser printer image formation process is the cleaning stage. During the cleaning stage, any lin-
gering toner residue that was left on the OPC Drum needs to be cleaned off before the next image can be created.
Since this toner cannot be reused, a Cleaning Blade is used to remove the residue from the OPC Drum and deposit
it into the Waste Toner Box.
Figure 8: Residual toner is cleaned off the OPC Drum to prepare for next image processing
To Next Page
Loading...
