Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide 9/9/05
Printer Component, Software Item, LCD Display, Printer Button Page 20.
MOTORS, SOLENOIDS & CLUTCHES
Motors
Printer Motors
2nd BTR Retract Motor (PPL Ref # 11-01-07)
Brings the 2nd BTR into contact with the paper during the 2nd transfer process and moves the BTR away from the
paper after the transfer is finished. The motor drive rotates the shaft and the eccentric cam attached on the shaft. The
eccentric cam pushes the lever for the BTR to bring it into contact with the paper for transferring the toner image on
the Transfer Belt to the paper. When the transferring is finished, the 2nd BTR Retract Motor starts to rotate again
and the lever is returned to its original position by spring force, causing the BTR to move away from the paper.
FSR Motor (PPL Ref # 11-01-03)
The Fuser Motor drives the Heat Roller in the Fuser Assembly.
Mag Motor (PPL Ref # 11-01-04)
The Magnet Roller Motor rotates the Magnet Roll in the Developer Assembly.
Micro Motor (PPL Ref # 11-01-07)
See 2nd BTR Retract Motor
PH Motor (PPL Ref # 05-02-20)
The Paper Handler Motor is a DC motor that drives the MSI (Multi-Sheet Inserter) and the rollers in the registration
section.
P/R Motor (PPL Ref # 11-01-06)
The P/R Motor drives the Photoconductor Drum which is located in the Developer Unit.
Rot Motor (PPL Ref # 11-01-05)
The Rotary Motor rotates the Rotary Frame Assembly that holds the Developer Assemblies.
manuals4you.commanuals4you.com
To Next Page
Loading...
