Epson AcuLaser CX-11N - MFP Maintenance and Self Diagnostics

Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide 9/9/05
Printer Component, Software Item, LCD Display, Printer Button Page 18.
7. Depress the Right Arrow button.
8. Depress the Up Arrow or Down Arrow button until the desired menu item is highlighted.
9. Depress the Right Arrow button to execute the function or the Left Arrow button to cancel the operation.
MFP Maintenance Mode
The MFP Maintenance Mode allows access to a set of self diagnostic tools and fax maintenance tools.
To enter MFP Maintenance Mode:
1. Depress the Color, Up Arrow , Down Arrow , and Right Arrow buttons while powering the CX-11 on.
Keep the buttons depressed until “MFP Maintenance Mode” is displayed in the upper left corner of the LCD
Panel.
2. Depress the Up Arrow or Down Arrow button until the desired menu item is highlighted.
3. Depress the Right Arrow button to execute the function or the Left Arrow button to cancel the operation.
Self Diagnostics
• Scanner Unit Tests
• Home Position
• Lamp Warm-up
• Cover Open Sensor (Scanner Cover and ADF Cover
• ADF Paper Sensor
• ADF Paper Jam Sensor
• Printer Unit Tests
• Engine
•RTC
•Fax Unit Tests
• Image Memory
• Modem
• Flash Memory
• Gate Array Logic
manuals4you.commanuals4you.com