Epson AcuLaser CX-11N - General Warnings and Errors

Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide 9/9/05
Printer Component, Software Item, LCD Display, Printer Button Page 42.
Warnings and Errors
Class Panel Message Error LED Description See FIP
Warning
Y Toner Low
---
The toner supply time of the Yellow Toner Cartridge has reached the preset time.
The printer, however, can be operated.
64 (p.237)
M Toner Low
---
The toner supply time of the Magenta Toner Cartridge has reached the preset
time. The printer, however, can be operated.
65 (p.238)
C Toner Low
---
The toner supply time of the Cyan Toner Cartridge has reached the preset time.
The printer, however, can be operated.
66 (p.239)
K Toner Low
---
The toner supply time of the Black Toner Cartridge has reached the preset time.
The printer, however, can be operated.
67 (p.240)
Worn Photoconductor
---
The Waste Toner Box TONER FULL SENSOR has detected a toner full state.
The printer, however, can be operated.
68 (p.241)
---
The number of drum rotations has exceeded the specified value. The printer,
however, can be operated.
69 (p.242)
Error
Install Y TnrCart
ON
The Yellow Toner Cartridge is not installed or not installed correctly.
1 (p.153)
Install M TnrCart
ON
The Magenta Toner Cartridge is not installed or not installed correctly.
2 (p.154)
Install C TnrCart
ON
The Cyan Toner Cartridge is not installed or not installed correctly.
3 (p.155)
Install K TnrCart
ON
The Black Toner Cartridge is not installed or not installed correctly.
4 (p.156)
Install Photocondctr
ON
The Photoconductor Unit is not installed or not installed correctly.
5 (p.157)
Photocondctr Trouble
ON
A communication error occurred between PWBA MCU and ANTENNA ASSY
(CRUM XERO).
6 (p.158)
An error occurred when writing data to ANTENNA ASSY (CRUM XERO).
7 (p.159)
A Photoconductor Unit with a memory of different specification device is
attached.
8 (p.160)
Wrong Photocondctr
ON
A Photoconductor Unit of an incorrect specification is installed.
9 (p.161)
TonerCart Error Y
ON
A communication error occurred between PWBA MCU and ANTENNA CTRG
(CRUM CTRIG).
10 (p.162)
An error occurred when writing data to ANTENNA CTRG (CRUM CTRIG).
11 (p.163)
A Yellow Toner Cartridge with a memory of different specification device is
attached.
12 (p.164)
Wrong Toner Y
ON
A Yellow Toner Cartridge of a different specification is attached.
13 (p.165)
manuals4you.commanuals4you.com