Replacing Ink Cartridges 41
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability. Leave the expended cartridge(s) installed until
you have obtained a replacement, or the ink remaining in the print head nozzles may dry
out. If you remove a low or expended cartridge, you cannot reinstall and use it.
1. Turn on the Artisan 710 Series.
If a cartridge is low or expended, you see a
message on the display screen. Note which
cartridges need to be replaced and press
OK. If
you’re replacing an expended ink cartridge,
follow the instructions on the display screen.
(You cannot print until you have replaced any
expended ink cartridges.)
If you’re replacing a cartridge before it’s expended, follow the steps below.
2. Open the scanner.
To Next Page
Loading...
