20
8. Select the area you want to adjust and press Enter.
9. Select Red, Green, or Blue and press the left arrow button to weaken the color tone or the right
arrow button to strengthen the color tone.
Note: The adjustment screen changes each time you press Enter.
10. Press Esc to return to the area selection screen.
11. Repeat steps 8 through 10 for each area, then select All to adjust the entire screen.
12. Press Esc to exit the menus.
Parent topic: Matching Images for Multiple Projectors
Adjusting the Projector's Brightness Level
When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are
equally bright. (Even after adjusting the brightness levels, the brightness of each projector may not
match exactly.)
1. Turn on all the projectors and display the same image.
2. Press the Menu button.
3. Select the ECO menu and press Enter.
4. Do one of the following:
• Select Power Consumption > Normal and press Esc.
To Next Page
Loading...
Need help?
General