Epson BrightLink 697Ui Setup Guide

5
About DuoLink
DuoLink is a BrightLink feature that lets you draw seamlessly across the projected images of two
adjacent projectors. This guide explains how to set up your computer and two BrightLink projectors to
use DuoLink.
This guide is intended for use with the following BrightLink projectors:
• BrightLink 685Wi
• BrightLink 685Wi+
• BrightLink 695Wi
• BrightLink 695Wi+
• BrightLink 696Ui
• BrightLink 697Ui
• BrightLink 710Ui
• BrightLink Pro 1450Ui
• BrightLink Pro 1460Ui
• BrightLink Pro 1470Ui
Note: The illustrations and screen captures in this guide are intended only for representative purposes.
While the specific items shown may not be identical to the ones on your product, the steps are the same
unless stated otherwise.
Note: The BrightLink 685Wi and BrightLink 685Wi+ projectors do not support finger touch. If you are
installing these models, please ignore any touch-specific instructions.

Epson BrightLink 697Ui Specifications

General

Brand	Epson
Model	BrightLink 697Ui
Category	Projector
Language	English