Epson BrightLink 697Ui Setup Guide

12
Your final configuration should look like this:
1 SYNC Out port
2 SYNC In port
3 Stereo mini cable
4 USB Type-B cable
5 Video cable (VGA or HDMI)
Parent topic: Configuring the Computer
Configuring the Display Settings
You must configure the display settings on the computer to project your desktop. The computer sees
each projector as a separate display, so you must configure them both.
Note: This is a general description of the tasks involved in configuring your computer display. See your
computer or operating system manual for details. Some video cards may not support certain display
configurations.
1. Set your computer's video settings to extend the desktop.

Epson BrightLink 697Ui Specifications

General

Display Technology	3LCD
Resolution	WUXGA (1920 x 1200)
Contrast Ratio	16, 000:1
Lamp Life	10, 000 hours (Eco mode)
Interactive	Yes
Built-in Speakers	16 W
Brightness	4000 lumens
Connectivity	HDMI, USB, VGA, LAN
Wireless Connectivity	Optional (Wireless LAN Unit ELPAP10)
Projection Size	60 inches - 100 inches