33
English
6 Adjusting the Image
To ensure the best image quality, follow the steps below to adjust the projected image.
Follow these guidelines for setting up the projector:
• Make sure the image is evenly rectangular, without distortion.
• Make sure the projector is tilted no more than 3° vertically and horizontally in relation to the projected
image.
A Turn on the projector
Do not make adjustments with the Quick Corner or Keystone functions of the
projector. Doing so may result in a reduction in image quality and pen or finger touch
calibration.
Your remote control or projector control panel may look different from the
illustrations in this section, but the instructions are the same except where noted.
Remote Control Control Panel
To Next Page
Loading...
