EasyManuals Logo

Epson BrightLink 710Ui Installation Guide

Epson BrightLink 710Ui
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
2 Specifications
Wall plate cover
When installing the wall plate cover, you need a space of approximately 10.3 inches (263 mm) from the center
of the wall plate to the left side, and approximately 9.9 inches (253 mm) to the right side.
Item Specification Additional information
Reference
page
Wall mount weight (including the
3-axis adjustment unit, slide plate,
wall plate, wall plate cover, and
end cap)
Approx. 17.4 lb
(7.9 kg)
——
Maximum load capacity 28.6 lb (13.0 kg)
Vertical slide adjustment range ±1.5 in. (38 mm) Refer to the
illustration
below
Horizontal slide adjustment range ±1.8 in. (45 mm) Refer to the
illustration on
page 9
Forward/backward slide
adjustment range
0 to 12.6 in.
(0 to 320 mm)
Adjustment from 3-axis adjustment unit installation
position: 3.4 in. (87 mm)
Refer to the
illustration on
page 9
Horizontal roll adjustment range ±3° Fine adjustments possible with adjustment dial
s p. 36
Horizontal rotation adjustment
range
±8° Fine adjustments possible with adjustment knob
s p. 36
Vertical tilt adjustment range ±3° Fine adjustments possible with adjustment dial
s p. 37
10.1 in. (255.7 mm)
20.0 in. (505.7 mm)
10.9 in. (277.1 mm)

Other manuals for Epson BrightLink 710Ui

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 710Ui and is the answer not in the manual?

Epson BrightLink 710Ui Specifications

General IconGeneral
Matrix type3-panel (p-Si TFT active)
Native aspect ratio16:10
Projection technology3LCD
Contrast ratio (dynamic)2500000:1
Contrast ratio (typical)-
Screen size compatibility- \
Projector native resolutionWUXGA (1920x1200)
Keystone correction, horizontal-3 - 3 °
Service life of light source20000 h
Service life of light source (economic mode)30000 h
PlacementCeiling, Wall
Product typeShort throw projector
Product colorWhite
Cable lock slotYes
Market positioningShort throw
Cable lock slot typeKensington
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Windows operating systems supportedWindows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64
3DNo
Supported video modes1080p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1920 x 1200 (WUXGA)
Ethernet LAN (RJ-45) ports1
RMS rated power16 W
Noise level38 dB
Noise level (economic mode)27 dB
Operating temperature (T-T)0 - 45 °C
Throw ratio0.22 - 0.37:1
Fixed focal length4.2 mm
Focal length range- mm
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2 W
Power consumption (typical)448 W
Power consumption (PowerSave)348 W
HDMI ports quantity3
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Weight and Dimensions IconWeight and Dimensions
Depth439.42 mm
Width495.3 mm
Height172.72 mm
Weight11203 g

Related product manuals