Options and Consumables
5-19
Note:
❏
The range of printing position is from 1.9 mm (9/120 inch) to 25.4
mm (120/120 inch) from the left edge of the paper. The default is the
pattern No. 2, which is about 3 mm (14/120 inch).
❏
The automatic sheet alignment unit must be installed prior to
adjusting the printing position.
❏
To print the instruction and print-position patterns, you need two
sheets of A4 or larger size single-sheet paper.
❏
Make sure that Manual/CSF is selected as the paper source on the
control panel. If not, select it by pressing the Paper Source button.
1. Turn off the printer.
c
Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
2. While holding down the Pitch button, turn on the printer.
* While holding down the Pitch button, turn on the printer.
Pitch
10 cpi
12 cpi
15 cpi
E
C
17 cpi
20 cpi
PS
To Next Page
Loading...
