5-20
Options and Consumables
3. Load paper into the automatic sheet alignment unit. The
printer prints the instruction and the printing-position
patterns.
4. As described in the instruction, compare the patterns of the
printing position and select the number of the desired pattern
using the LF/FF D and Load/Eject U buttons. Font lights
indicate the pattern number currently selected.
Check if the pattern shown by these lights matches that of the
number of your desired printing position pattern.
1. These lights indicate the pattern number selected.
2. Press either of these buttons to change the pattern number.
5. Turn off the printer.
Font Pitch Paper Source
Paper Out
Pause
3sec
Micro Adjust
LF/FFReset Load/Eject
Tear Off
/
Special Paper
10 cpi
12 cpi
15 cpi
Tear Off
Envelope
Manual/CSF
Tractor
Card
17 cpi
20 cpi
PS
To Next Page
Loading...
