108
For originals between 8.2 inches (210 mm) and 11.7 inches (297 mm) long:
• Open and extend the document scanner's input tray, open the flatbed scanner's stopper, and slide the
stopper forward or backward so that it is a little longer than the length of the original. (Do not open the
output tray on the document scanner.)
For originals between 11.7 inches (297 mm) and 14 inches (356 mm) long:
• Open the document scanner's input tray, pull out and extend the scanner dock's output tray and output
tray extension, and open the stopper. (Do not open the output tray on the document scanner.)
• Extend the output tray a little longer than the length of the original and move the stopper forward or
backward as necessary.
For originals that are 14 inches (356 mm) or longer:
• Open the document scanner's input tray.
• Leave the output tray closed, and close the flatbed and document scanner's stoppers.
To Next Page
Loading...
Need help?
General
