17
2. Click the Power Save tab.
3. Select the length of time after which you want the scanner to go to sleep as the Sleep Timer setting.
4. Select the length of time after which you want the scanner to automatically turn off when not in use
as the Power Off Timer setting.
5. Select the length of time after which you want the scanner to automatically turn off when not in use
as the AC power or AC adapter setting. You can also turn off the timer.
6. Turn on the Direct Power On setting if you want the scanner to turn on when it is connected to the
power source, without pressing the power button.
7. Click Set to save the settings.
8. Close the Epson Scan 2 Utility.
Parent topic: Scanner Basics
To Next Page
Loading...
Need help?
General
