Controlling a Networked Projector Using a Web Browser
108
Once you have connected your projector to your network, you can select
projector settings and control projection using a compatible Web browser.
This lets you access the projector remotely.
a
• Make sure the computer and projector are connected to the network.
When projecting images using a wireless LAN, connect in Advanced
connection mode.
• The Web setup and control features support Internet Explorer 9.0 or
later (Windows), and Safari (OS X) on networks that do not use a
proxy server for connection. You cannot select all of the projector
menu settings or control all projector functions using a Web
browser.
a
Make sure the projector is turned on.
b
Make sure your computer or device is connected to the same network
as the projector.
c
Start your Web browser on the computer or device.
d
Go to the Epson Web Control screen by entering the projector's IP
address into the browser's address box.
You see the Epson Web Control screen.
e
To control projection remotely, select Basic Control.
a
• If you see a log in window, enter your user name and
password. (The user name is EPSONREMOTE and the default
password is guest.)
• You can change the password in Remote Password in the
projector's Network menu.
s Network > Network Configuration > Basic > Remote
Password
To Next Page
Loading...
Need help?
General
Weight and Dimensions
