Epson EB-1795F User Manual

Solving Image or Sound Problems
160
or overall blurriness remain, display a uniformly patterned image on the
screen and manually adjust the Tracking and Sync. settings in the
projector's Signal menu.
• If you are projecting from a computer, use a lower resolution or select a
resolution that matches the projector's native resolution.
gg Related Links
• "Auto H/V-Keystone" p.41
• "Auto V-Keystone" p.41
• "Input Signal Settings - Signal Menu" p.119
• "Image Quality Settings - Image Menu" p.117
• "Supported Monitor Display Resolutions" p.171
• "Focusing the Image Using the Focus Ring" p.49
• "Cleaning the Lens" p.141
• "Focusing the Image Using the Focus Button" p.48
Solutions When the Image Brightness or Colors are
Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the
following solutions:
• Press the [Color Mode] button on the remote control to try different color
modes for the image and environment.
• Check your video source settings.
• Adjust the available settings on the projector's Image menu for the current
input source, such as Brightness, Contrast, Tint, Color Temp., and/or
Color Saturation.
• Make sure you selected the correct Input Signal or Video Signal setting in
the projector's Signal menu, if available for your image source.
s Signal > Advanced > Input Signal
s Signal > Advanced > Video Signal
• Make sure you selected the correct Gamma or RGBCMY setting in the
projector's Image menu.
s Image > Advanced
• Make sure all the cables are securely connected to the projector and your
video device. If you connected long cables, try connecting shorter cables.
• If you are using ECO as Power Consumption, try selecting Normal.
s ECO > Power Consumption
a
At high altitudes or locations subject to high temperatures, the image
may become darker and you may not be able to adjust the Power
Consumption setting.
• Position the projector close enough to the screen.
• If the image has been progressively darkening, you may need to replace the
projector lamp soon.
gg Related Links
• "Color Mode" p.54
• "Input Signal Settings - Signal Menu" p.119
• "Image Quality Settings - Image Menu" p.117
• "Projector Setup Settings - ECO Menu" p.131
Solutions to Sound Problems
If there is no sound or the volume is too low or high, try the following
solutions:
• Adjust the projector's volume settings.
• Press the [A/V Mute] button on the remote control to resume video and
audio if they were temporarily stopped.
• Check your computer or video source to make sure the volume is turned up
and the audio output is set for the correct source.
• Disconnect the audio cable, and then reconnect it.
• Check the audio cable connections between the projector and your video
source.
• If you do not hear sound from an HDMI source, set the connected device to
PCM output.
• Make sure any connected audio cables are labeled "No Resistance".

Epson EB-1795F Specifications

General

Matrix size	0.59 \
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Projection distance	1.35 - 1.62 m
Vertical scan range	100 - 120 Hz
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	30 - 300 \
Projection distance (tele)	0.8 - 8.2 m
Projection distance (wide)	0.7 - 6.8 m
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	-20 - 20 °
Projector brightness (economic mode)	1900 ANSI lumens
3D	No
Full HD	Yes
Video processing	10 bit
Video color modes	Blackboard, Cinema, Dynamic, Presentation, sRGB, DICOM simulation mode
Supported video modes	1080p
Analog signal format system	-
Supported graphics resolutions	1920 x 1080 (HD 1080)
Lamp power	214 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	7000 h
Noise level	39 dB
Country of origin	Philippines
Noise level (economic mode)	30 dB
Focus	Manual
Throw ratio	1.02 - 1.23:1
Focal length range	13.52 - 16.22 mm
Aperture range (F-F)	1.58 - 1.7
USB 2.0 ports quantity	2
S-Video inputs quantity	0
Standard interfaces	HDMI, NFC, USB, VGA, Wireless LAN
USB display function	3 in 1: Image / Mouse / Sound
Sustainability certificates	TCO
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Placement	Ceiling, Desktop
Product type	Standard throw projector
Product color	White, Grey
Market positioning	Business
Cable lock slot type	Kensington
RMS rated power	1 W
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.34 W
Power consumption (typical)	295 W
Power consumption (economy mode)	208 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, HDMI
Bundled software	EasyMP Multi PC Projection
Pallet width	800 mm
Pallet height	150 mm
Pallet length	1200 mm
Pallet weight	0 g
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	70 pc(s)
Quantity per pallet (UK)	84 pc(s)
Quantity per pallet layer	5 pc(s)
Harmonized System (HS) code	85286200
Quantity per pallet layer (UK)	6 pc(s)

Weight and Dimensions

Depth	213 mm
Width	292 mm
Height	44 mm
Weight	1800 g
Package depth	420 mm
Package width	370 mm
Package height	145 mm
Package weight	3730 g