Epson EB-1795F - Page 95

Wireless Network Projection
95
* Only available for the Advanced connection mode.
** Only available for EB‑1795F/EB‑1785W/EB‑1781W.
a
Contact your network administrator for guidance on entering the
correct information.
a
If you want to set up the WPA2-EAP or WPA/WPA2-EAP security,
make sure your digital certificate file is compatible with projector
registration and placed directly on the USB storage device.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Network menu and press [Enter].
d
Select Network Configuration and press [Enter].
e
Select the Wireless LAN menu and press [Enter].
f
Select the Security setting and press [Enter].
g
Select the security settings to match your network settings.
h
Do one of the following according to the security you selected.
• WPA2-PSK, WPA/WPA2-PSK: Select Complete and follow the on-
screen instructions to save your settings and exit the menus.
• WPA2-EAP, WPA/WPA2-EAP: Select EAP Method and press
[Enter].