Epson EB-2155W User Manual

Wireless Network Projection
104
c
Remove the screw securing the wireless LAN module stopper and
remove the stopper.
d
Insert the wireless LAN module into the port.
e
Replace the wireless LAN module stopper, and secure it using the screw
you removed.
f
Close the air filter cover.
g
Plug in and turn on the projector.
Installing the Wireless LAN Module into the Rear
USB-A Port
To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module (EB-2140W/EB-2040). Do not install any other type of
wireless LAN module.
Attention
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.

Epson EB-2155W Specifications

General

Projection Technology	3LCD
Resolution	WXGA (1280 x 800)
Brightness	5000 lumens
Contrast Ratio	15, 000:1
Throw Ratio	1.38 - 2.24:1
Speakers	16 W
Connectivity	HDMI, VGA, USB, Wireless
Zoom Ratio	1.6x
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Dimensions	377 x 291 x 101 mm