EasyManuals Logo

Epson EB-2155W User Manual

Epson EB-2155W
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Using Multiple Projectors
90
e
Use the arrow buttons to select the identification number you want to
use for the projector. Then press [Enter].
f
Press [Menu] or [Esc] to exit the menus.
Repeat these steps for all the other projectors you want to operate from one
remote control.
Selecting the Projector You want to Operate
After setting the projector's ID, select the ID for the projector you want to
operate using the remote control.
a
Aim the remote control at the target projector and press the [ID]
button.
The current Projector ID is displayed on the projected screen. It
disappears after about 3 seconds.
b
While holding the [ID] button, press the number button that matches
the ID of the projector you want to operate.
The projector you want to operate is selected.
c
Press the [ID] button to check if the ID-setting process worked.
You see a message displayed by the projector.
If the remote control is listed as On, you can operate the projector
from the remote control.
If the remote control is listed as Off, you cannot operate the projector
from the remote control. Repeat the steps above to enable the remote
control.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-2155W and is the answer not in the manual?

Epson EB-2155W Specifications

General IconGeneral
Projection Technology3LCD
ResolutionWXGA (1280 x 800)
Brightness5000 lumens
Contrast Ratio15, 000:1
Throw Ratio1.38 - 2.24:1
Speakers16 W
ConnectivityHDMI, VGA, USB, Wireless
Zoom Ratio1.6x
Keystone CorrectionVertical ±30 degrees, Horizontal ±30 degrees
Dimensions377 x 291 x 101 mm

Related product manuals