Epson EB-2155W User Manual

Installing Batteries in the Remote Control
33
The remote control uses the two AA batteries that came with the projector.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a
Remove the battery cover as shown.
b
Insert the batteries with the + and – ends facing as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
c
Replace the battery cover and press it down until it clicks into place.
gg Related Links
• "Remote Control Operation" p.33
Remote Control Operation
The remote control lets you control the projector from almost anywhere in
the room.

Epson EB-2155W Specifications

General

Projection Technology	3LCD
Resolution	WXGA (1280 x 800)
Brightness	5000 lumens
Contrast Ratio	15, 000:1
Throw Ratio	1.38 - 2.24:1
Speakers	16 W
Connectivity	HDMI, VGA, USB, Wireless
Zoom Ratio	1.6x
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Dimensions	377 x 291 x 101 mm