Wireless Network Projection from a Mobile Device (Screen Mirroring)
113
You can send image to your projector from mobile devices such as laptops,
smartphones, and tablets using Miracast technology (EB-2265U/EB-
2255U/EB-2165W).
If your device supports Miracast, you do not need to install any additional
software. When using a Windows computer, make sure the necessary adapter
for the Miracast connection is available.
Note the following limitations when using Screen Mirroring features.
• You cannot play an interlaced image.
• You cannot play multi-channel audio over 3ch (channel 3).
• You cannot project images with a resolution above 1920 × 1080 and a frame
rate above 30 fps.
• You cannot play 3D video.
• You may not be able to view contents with copyright protection with a
Miracast connection depending on your device.
• Do not change the projector's Screen Mirroring Settings during Screen
Mirroring projection. Doing so may cause the projector to disconnect and it
may take a while to re-connect.
s Network > Screen Mirroring Settings
• Do not turn off the projector directly by the breaker during Screen
Mirroring projection.
a
Mobile devices with Android installed or Windows 8.1 or later installed
mainly support Miracast.
Support for Miracast varies depending on the mobile device. See your
mobile device manual for details.
gg Related Links
• "Selecting Screen Mirroring Settings" p.113
• "Connecting Using Screen Mirroring in Windows 10" p.115
• "Connecting Using Screen Mirroring in Windows 8.1" p.116
• "Connecting Using Screen Mirroring with the Miracast Function" p.117
Selecting Screen Mirroring Settings
You must select Screen Mirroring settings for your projector to project images
from your mobile device.
a
If you set a Screen Mirroring Protec. password, turn off your Screen
Mirroring Protec. password first.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
To Next Page
Loading...
Need help?
General
