Epson EB-2155W User Manual

Image Quality Settings - Image Menu
142
a
• The Brightness setting does not affect lamp brightness. To change
the lamp brightness mode, use the Power Consumption setting in
the projector's ECO menu.
• You cannot select the Noise Reduction setting when the following
are being input.
• The Deinterlacing setting is set to Off.
• A digital RGB signal is being input.
• An interlaced signal (480i/576i/1080i) is being input.
gg Related Links
• "Available Color Modes" p.60

Epson EB-2155W Specifications

General

Projection Technology	3LCD
Resolution	WXGA (1280 x 800)
Brightness	5000 lumens
Contrast Ratio	15, 000:1
Throw Ratio	1.38 - 2.24:1
Speakers	16 W
Connectivity	HDMI, VGA, USB, Wireless
Zoom Ratio	1.6x
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Dimensions	377 x 291 x 101 mm