Projector Network Settings - Network Menu
154
Setting Options Description
Security Selects the type of security used on the
wireless network.
When setting security, follow the
instructions from the administrator of
the network system you want to connect
to.
Open Open: security is not set.
WPA2-PSK WPA2-PSK: communication is
performed using WPA2 security. Uses
AES method for encryption. When
establishing a connection from a
computer to the projector, enter the
value set in the passphrase.
WPA/WPA2-PSK WPA/WPA2-PSK: connects in WPA
personal mode. Encryption method is
selected automatically according to the
access point settings. Set a passphrase
which is the same for the access point.
WPA2-EAP *
WPA/WPA2-EAP *
WPA2-EAP or WPA/WPA2-EAP:
connects in WPA enterprise mode.
Encryption method is selected
automatically according to the access
point settings. Select this item when
using LEAP.
Passphrase Various
passphrases from 8
to 32 characters
(when entering
from a Web
browser: various
passphrases from 8
to 63 characters)
For WPA2-PSK and WPA/WPA2-PSK
security, selects the pre-shared
passphrase used on the network.
When the passphrase is entered and the
[Enter] button is pressed, the value is set
and displayed as an asterisk (*).
We recommend changing the passphrase
periodically for security. If the network
settings are initialized, it returns to the
initial passphrase.
EAP Method * Set the EAP settings for WPA2-EAP and
WPA/WPA2-EAP security.
Setting Options Description
EAP Type EAP Type: selects the protocol for
authentication.
• PEAP: authentication protocol widely
used in Windows Server.
• PEAP-TLS: authentication protocol
used in Windows Server. Select this
when using a client certificate.
• EAP-TLS: authentication protocol
widely used to use a client certificate.
• EAP-FAST, LEAP: select this when
these authentication protocols are
used.
User name User name: enter up to 64 alphanumeric
characters. You can enter up to 32
alphanumeric characters in the projector
menu (you cannot use : and spaces). To
enter more than 32 characters, use your
Web browser. You can enter a domain
name by adding it before the user name
and separating them with a backslash
(domain\username).
When importing a client certificate, the
name the certificate was issued to is
automatically set.
Password Password: enter a password up to 64
alphanumeric characters for
authentication when using the PEAP,
EAP-FAST, or LEAP type. You can enter
up to 32 alphanumeric characters in the
projector menu (you cannot use * : and
spaces). To input more than 32
characters, use your Web browser. After
you enter the password and select Finish,
the password is displayed as an asterisk
(*).
Client Certificate Client Certificate: imports the client
certificate when using the PEAP-TLS or
EAP-TLS type.
To Next Page
Loading...
Need help?
General
