Epson EB-2155W - Page 177

Projector Lamp Maintenance
177
a
• If you notice the lamp is cracked when removing the lamp,
replace it with a new lamp, or contact Epson for help.
• The lamp(s) in this product contain mercury (Hg). Check your
local laws and regulations regarding disposal or recycling. Do
not put in the trash.
g
Install the new lamp.
• EB-2265U/EB-2255U/EB-2250U/EB-2245U/EB-2165W/EB-
2155W/EB-2065/EB-2055/EB-X550KG/EB-X500KG: Gently insert
the new lamp into the projector. If it does not fit easily, make sure it
is facing the right way. Press the handle down.
• EB-2140W/EB-2040: Gently insert the new lamp into the projector.
If it does not fit easily, make sure it is facing the right way.
Attention
Do not touch any glass on the lamp assembly to avoid premature lamp
failure.