Epson EB-440W User Manual

Base (without Slide Plate)
Name Function
A
Ceiling mount fixing
points
(four points)
Connect the ceiling mount fixing points to a commercially
available ceiling mount or wall mount when mounting the
projector to a ceiling or wall. For details, see the
documentation supplied with the the ceiling mount or
wall mount.
B
Security cable
installation point
Pass a commercially available wire lock through here and
lock it in place. s p.53
Control panel
Name Function
A
[t] button
Turns the projector power on or off.
s Quick Start Guide
B
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.94
C
[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.21
D
[Enter] button
If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
When the Configuration Menu or Help screen is
displayed, pressing this button confirms the current item
and moves to the next level. s p.73
Part Names and Functions
15

Epson EB-440W Specifications

General

Projection technology	LCD
Contrast ratio (typical)	1600:1
Projector native resolution	WXGA (1280x800)
Aspect ratio	16:10
RS-232 ports	1
Dimensions (WxDxH)	369 x 481 x 115 mm
Lamp type	UHE
Lamp power	230 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3500 h
RMS rated power	10 W
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)	1 W

Weight and Dimensions

Weight	5700 g