Connecting and Removing USB Devices
USB memories and USB compatible digital cameras, hard disk drives, and
the optional Document Camera can be connected to the projector. Image
files on a connected digital camera or JPEG files on a connected USB
storage device can be played back as a Slideshow.
s "Presentations Using
Slideshow" p.28
When the optional Document Camera is connected, images from the
Document Camera will be projected.
Connecting USB devices
This section describes how to connect USB devices, using the optional
Document Camera as an example. Connect the Document Camera to the
projector using the USB cable supplied with the Document Camera. When
the Document Camera is connected to the projector during projection,
press the [USB] button on the remote control or the [Source Search] button
on the control panel to switch to images from the Document Camera.
s p.21
A
To Document Camera USB port
B
USB cable
C
USB(TypeA) port
Attention
•
If you use a USB hub, operation may not be performed correctly. Connect a
digital camera or USB storage device directly to the projector.
•
When connecting and using a USB-compatible hard disk, make sure you
connect the AC adaptor supplied with the hard disk.
•
Connect a digital camera or hard disk to the projector using the USB cable
supplied with or specified for use with the equipment.
Removing USB devices
After projection is finished, use the following procedure to remove the USB
device from the projector.
Connecting External Equipment
34
To Next Page
Loading...
Need help?
General
Weight and Dimensions
