Setting the Auto Iris
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
Procedure
A
Press the [Menu] button and select Auto Iris from the Image
menu of the Configuration Menu.
s "Using the Configuration
Menu"
Using Remote Control Using Control panel
B
Select "On".
The setting is stored for each Color Mode.
C
Press the [Menu] button to close the Configuration Menu.
q
Auto Iris can only be set when the Color Mode is set to Dynamic or
Theatre.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to turn off screen images so that the
audience's attention is focused on what you are saying, or when you do not
want the audience to see operations such as changing files.
Procedure
Remote Control
Each time you press the button, A/V Mute turns on or off.
q
• If you use this function when projecting moving images, the images
and sound continue to be played back by the source, and you
cannot return to the point where A/V Mute was activated.
• You can choose to display Black, Blue, or Logo as the A/V Mute
display using the Extended - Display - A/V Mute setting from the
configuration menu. s p.78
• Microphone audio is also output when A/V Mute is turned on.
Functions for Enhancing Projection
40
To Next Page
Loading...
Need help?
General
Weight and Dimensions
