Image File Display Settings and Slideshow
Operation Settings
You can set the file display order and Slideshow operations on the Option
screen.
Although the following steps are explained based on the remote control,
you can perform the same operations from the projector's control panel.
Procedure
A
Use the [ ][ ][ ][ ] buttons to position the cursor
on the folder for which you want to set display conditions and
press the [Esc] button. Select "Option" from the sub-menu that
is displayed, and then press the [Enter] button.
B
When the following Option screen is displayed, set each of the
items.
Position the cursor on the setting of the item you want to change and
press the [Enter] button to enable the setting.
The following table shows the details of each item.
Display order
You can set the order of the files to be displayed. You can
select sorting of the files into either Name order or Date
order.
Continuous
Play
Set whether to repeat the Slideshow.
Screen switch-
ing time
You can set the time for a single file to be displayed in Play
Slideshow. You can set a time between No (0) and 60
Seconds. When you set No, auto play is disabled.
C
[Use the [ ][ ][ ][ ] buttons to position the cursor
on "OK" and press the [Enter] button.
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel and press the [Enter] button.
Presentations Using Slideshow
33
To Next Page
Loading...
Need help?
General
Weight and Dimensions
