Epson EB-440W User Manual

Connecting
Procedure
A Turn on the computer.
B Connect to the power cable (supplied).
C
Turn the projector on.
D Connect to the USB cable.
When outputting audio from the projector's speaker, connect
an audio cable (commercially available) to the Audio2 port.
s "Connecting for the first time" p.24
s "From the second time" p.27
Attention
Connect the projector directly to the computer and not via a USB hub.
Connecting for the first time
The first time you connect, the driver needs to be installed. The procedure
is different for Windows and Mac OS.
Procedure
For Windows
A Driver installation starts automatically.
When you are using Windows 2000, double-click My Computer -
EPSON_PJ_UD - EMP_UDSE.exe on your computer.
Connecting with a USB Cable and Projecting (USB Display)
24

Epson EB-440W Specifications

General

Projection technology	LCD
Contrast ratio (typical)	1600:1
Projector native resolution	WXGA (1280x800)
Aspect ratio	16:10
RS-232 ports	1
Dimensions (WxDxH)	369 x 481 x 115 mm
Lamp type	UHE
Lamp power	230 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3500 h
RMS rated power	10 W
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)	1 W

Weight and Dimensions

Weight	5700 g