107
Note: You can use the keystone buttons to correct the image up to ± 3° horizontally or vertically. If the
projector is mounted on the wall, use the adjustment dials on the wall mount to correct the screen image
before using any other digital correction methods.
Note: You cannot combine keystone correction with other correction methods at the same time.
Note: If you change the Screen Type setting or adjust the image position, your image adjustments are
reset.
1. Turn on the projector and display an image.
2. Press one of these keystone buttons on the control panel to display the Keystone adjustment
screen.
To Next Page
Loading...
