243
Selecting a Networked Device Source
You can project an image from devices connected to the projector via a network. You can select the
image source from computers running Epson iProjection (Windows/Mac) and smartphones or tablets
running the Epson iProjection app.
1. Select the Other Tools icon on the projector toolbar.
2. Select Participant List.
You see a list of available devices. The icon next to a user name indicates the currently selected
source.
3. Select the user name for the device from which you want to project.
Note: You can select Thumbnail to switch the display from user names to thumbnail images of each
device's screen. Select Refresh to update the user list.
4. Select Close.
You see the screen image from the selected device.
While the user selection screen is displayed, you cannot do the following:
• Use other interactive features
• Control the projector from the bottom toolbar
• Connect to multiple projectors
• Hear sound from the projector
• Project an image using Epson iProjection (Windows/Mac)
Note: You cannot access the Participant List screen when connecting to multiple projectors by using
Epson iProjection (Windows/Mac) and projecting the same image (mirroring).
Parent topic: Built-in Whiteboard Mode
Saving Pages in Whiteboard Mode
You can save your whiteboard pages as JPG, PDF, PNG, or EWF2 files and select the location where
you want to store your files.
To Next Page
Loading...
Need help?
General
