121
After you adjust the image size, the Image Shift screen is displayed automatically.
3. Use the arrow buttons on the projector or remote control to adjust the image position.
Note: You can also use the Installation menu to adjust the Image Shift setting.
Note: The Image Shift setting is retained even if the projector is turned off; however, you need to
readjust the image position if you change the projector's location or angle.
Parent topic: Using Basic Projector Features
Related references
Installation Settings - Installation Menu
Focusing the Image
Wait at least 30 minutes after you start projecting to adjust the focus.
1. Turn on the projector and display an image.
2. Press the Menu button.
To Next Page
Loading...
