171
1. Press the Menu button.
2. Select the Multi-Projection menu and press Enter.
3. Select the Scale setting and press Enter.
You see this screen:
Note: Make sure an active computer signal is connected to the projector or the Scale option will not
be displayed.
4. Select one of the following as the Scale setting:
• Auto to automatically adjust the clipped areas according to the HDMI Out Setting and Edge
Blending settings you selected
• Manual to adjust the clipped areas manually
5. Turn on the Scale setting.
6. Select the Scale Mode setting and select one of these options:
• Zoom Display to maintain the image aspect ratio as you scale the image
To Next Page
Loading...
Need help?
General
