Epson EB-G6800 - Connecting External Equipment

Connecting External Equipment
You can output images and audio by connecting an external monitor or speaker.
A
When outputting images to an external monitor
Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.
B
When outputting audio to an external speaker
Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
MonitorOut D-Sub
AudioOut AudioIN
a
• Make the following settings to output image and audio even when the projector is in standby mode.
Set Standby Mode to Communication On.
Press [Menu] button > Extended > Standby Mode
Set A/V Output to Always On.
Press [Menu] button > Extended > A/V Settings > A/V Output
• Only analog RGB signals being input to the Computer port or the BNC port can be output to an external monitor.
Connecting Equipment
39