Corner Wall
Manually correct distortion that occurs when projecting on a surface with right angles, such as a square pillar or the corner of a room, and adjust the amount of
expansion and contraction.
a
• Project onto a surface with a right angle.
• If a large amount of adjustment is performed, the focus may not be uniform even after making adjustments.
• You may not be able to adjust Corner Wall correctly when using the short throw zoom lens ELPLU01.
Correction range
Project with the horizontal lens shift in the center of the surface with right angles. The correction range is shown on the following page.
Projecting Images
52
To Next Page
Loading...
