Submenu Function
Reset
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal, Image Processing and
DisplayPort EQ Setting.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.101
Settings Menu
Submenu Function
Geometric Cor-
rection
You can correct distortion.
s "Correcting Distortion in the Projected Image" p.42
• H/V-Keystone:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Curved Surface:
Corrects distortion that occurs when projecting on a
curved surface.
• Point Correction:
Divides the projected image into a grid and corrects the
distortion by moving the selected point of intersection
from side to side and up and down.
• Corner Wall:
Corrects distortion that occurs when projecting on a
surface with right angles.
Split Screen
You can split the screen into two screens.
s "Projecting Two Images Simultaneously (Split Screen) "
p.66
Control Panel
Lock
You can use this to restrict operation of the projector's
control panel.
s "Control Panel Lock" p.80
Power Con-
sumption
When set to Normal, the lamp is at its brightest.
When set to Temp Interlock, if the surrounding
temperature
*
gets too high, the lamp automatically dims to
control the operating temperature.
When set to ECO, the power consumption during
projection drops and the fan noise is reduced.
Volume
You can adjust the volume for audio output from the Audio
Out port. Setting values are saved for each source.
List of Functions
90
To Next Page
Loading...
Need help?
General
