V-Keystone
H-Keystone
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
Operations
a
Select Quick Corner from Geometric Correction.
b
Use the [ ], [ ], [ ], and [ ] buttons to select the corner you
want to adjust, and then press the [
] button.
c
Use the [ ], [ ], [ ], and [ ] buttons to correct the position of
the corner.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
Projecting Images
44
To Next Page
Loading...
