Epson EB-G6800 - Page 57

Operations
a
Select Corner Wall from Geometric Correction.
b
Select Corner Type.
c
To fit the projected image to the projection position, select
Horizontal Corner or Vertical Corner, and then press the [
]
button.
When the surfaces line up horizontally
Select Horizontal Corner.
When the surfaces line up vertically
Select Vertical Corner.
From here on, steps are explained using Horizontal Corner as an
example.
d
Press the [Esc] button, and then select Correct Shape.
e
Adjust the position of the projector and the lens shift so that the
line in the center of the screen matches the corner (the point
where the two surfaces meet).
s "Adjusting the Position of the Projected Image (Lens Shift)"
p.22
a
Each time you press the [ ] button, you can show or hide the
image and the grid.
f
Use the [ ], [ ], [ ], and [ ] buttons to select the area you
want to adjust, and then press the [
] button.
Projecting Images
57