Indicator Cause Remedy or Status
Power
supply
Status Laser Temp Filter
Off
Blue -
Flashing
Off Off
Orange -
On
Filter Airflow Error Check the following two points.
• Check that the air filter and air exhaust vents are clear, and that the projector is not positioned against a
wall.
• If the air filter is clogged, turn off the power, remove the power cord from the electrical outlet, and then
clean or replace them.
s "Cleaning the Air Filter" p.183
s "Replacing the Air Filter" p.186
After checking, connect the power cord to the electrical outlet.
If the error continues after checking the points above, stop using the projector, remove the power plug
from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson
Projector Contact List.
s Epson Projector Contact List
Off
Blue -
Flashing
Orange -
On
Orange -
On
Off
Lens Shift Error Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Blue -
Flashing
Status
varies
Status
varies
Orange -
Flashing
Status
varies
High Temp Warn-
ing
This is not an error. However, if the temperature rises too high again, projection stops automatically.
Check the following two points.
• Check that the air filter and air exhaust vents are clear, and that the projector is not positioned against a
wall.
• If the air filter is clogged, turn off the power, remove the power cord from the electrical outlet, and then
clean or replace them.
s "Cleaning the Air Filter" p.183
s "Replacing the Air Filter" p.186
Blue -
Flashing
Status
varies
Orange -
Flashing
Status
varies
Status
varies
Laser Warning Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Reading the Indicators
160