Epson EB-L210W User Manual

182
1. Hold down the Freeze button on the remote control for about 5 seconds or until you see this menu.
2. Press the down arrow to select Password and press Enter.
You see the prompt "Change the password?".
3. Select Yes and press Enter.
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
6. Press Esc to return to the menu.
7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic: Password Security Types

Epson EB-L210W Specifications

General

Projection Technology/System	3LCD
Resolution	1280 x 800
Input Ports	HDMI, VGA, USB, Composite
Output Ports	VGA
Noise Level	37 dB (Normal mode), 29 dB (ECO mode)
Power Consumption	0.3 W (Standby)