Epson EB-L615U User Manual

Projector Network Settings - Network Menu
168
Setting Options Description
Verify Server Cert. Verify Server Cert.: selects whether to
verify the server certificate when a CA
certificate has been set.
CA certificate CA certificate: imports the CA certificate
when using the PEAP, PEAP-TLS, EAP-
TLS, or EAP-FAST type.
RADIUS
Serv.Name
RADIUS Serv.Name: enter the server
name to verify. You can enter up to 32
alphanumeric characters.
Channel 1ch
6ch
11ch
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
SSID Display On
Off
Select whether to display the SSID on the
network standby screen and Home
screen.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen and
Home screen.
IPv6 Settings Select the IPv6 settings if you want to
connect the projector to the network
using IPv6:
Setting Options Description
IPv6 IPv6: set to On if you want to connect
the projector to the network using IPv6.
IPv6 is supported to monitor and control
the projector over a network using Epson
Web Control and PJLink.
Auto Configuration Auto Configuration: set to On to assign
addresses automatically according to the
Router Advertisement.
Use Temporary
Address
Use Temporary Address: set to On if
you want to use a temporary IPv6
address.
Network Menu - Wired LAN Menu
Settings on the Wired LAN menu let you select the wired LAN settings.
s Network > Network Configuration > Wired LAN

Epson EB-L615U Specifications

General

HDBaseT port	Yes
HDMI connector type	Full-size
Serial interface type	RS-232C
USB 2.0 ports quantity	1
Mobile High-Definition Link (MHL)	-
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.4 - 23.84 m
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	50 - 500 \
Projection distance (tele)	2.4 - 23.8 m
Projection distance (wide)	1.4 - 14.8 m
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	4200 ANSI lumens
Video color modes	Bright cinema, Cinema, Dynamic, Presentation, sRGB
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
Focus	Manual
Throw ratio	1.35 - 2.20:1
Focal length range	20 - 31.8 mm
Aperture range (F-F)	1.5 - 1.7
Vertical lens shift range	-50 - 50 %
Horizontal lens shift range	-20 - 20 %
Placement	Ceiling
Product type	Standard throw projector
Product color	Black
Cable lock slot type	Kensington
Power source	AC
Auto power off	No
AC input voltage	100-240 V
AC input frequency	50-60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	353 W
Power consumption (economy mode)	265 W
RMS rated power	10 W
Noise level	38 dB
Country of origin	China
Noise level (economic mode)	27 dB
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, VGA
Pallet width	800 mm
Pallet height	2180 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	14 pc(s)
Quantity per pallet layer	2 pc(s)

Weight and Dimensions

Depth	304 mm
Width	440 mm
Height	120 mm
Weight	8500 g
Package depth	564 mm
Package width	538 mm
Package height	208 mm
Package weight	11640 g